January 2012 7.1 Display and Operation 1227
MP_plcDialogLanguage
PLC conversational language
Available from NCK software version: 597 110-01.
Format: Selection menu
Selection: See MP_ncLanguage
Default: ENGLISH
Access: LEVEL1
Reaction: RUN
In MP_plcErrorLanguage you define the end of the path indicating the PLC
error messages (language abbreviation).
MP_plcErrorLanguage
PLC error message language
Available from NCK software version: 597 110-01.
Format: Selection menu
Selection: See MP_ncLanguage
Default: ENGLISH
Access: LEVEL1
Reaction: RUN
MP_helpLanguage is used to define the end of the path of the help texts
(language abbreviation).
MP_helpLanguage
Language for online help
Available from NCK software version: 597 110-01.
Format: Selection menu
Selection: See MP_ncLanguage
Default: ENGLISH
Access: LEVEL1
Reaction: RUN
To Next Page
Loading...
