HEIDENHAIN MANUALPLUS 620 - Page 1402

1402 HEIDENHAIN Technical Manual MANUALplus 620
MP_distCarrierRefY
Y dimension for tool carrier reference
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: –100 000.000 to +100 000.000 [mm]
Enter the distance in millimeters [mm] from the tool holder
datum to the tool carrier datum.
Default: No value, parameter optional (initial value: 0)
Access: LEVEL3
Reaction: RESET
MP_correctionX
Correction in X of the tool-holder position
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: –100 000.000 to +100 000.000
Correction value in [mm]
Default: 0
Access: LEVEL3
Reaction: RESET
MP_correctionZ
Correction in Z of the tool-holder position
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: –100 000.000 to +100 000.000
Correction value in [mm]
Default: 0
Access: LEVEL3
Reaction: RESET
MP_correctionY
Correction in Y of the tool-holder position
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: –100 000.000 to +100 000.000
Correction value in [mm]
Default: 0
Access: LEVEL3
Reaction: RESET