HEIDENHAIN MANUALPLUS 620 - Page 1426

1426 HEIDENHAIN Technical Manual MANUALplus 620
MP_deltaZ
Horizontal expansion of the graphic window
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: 0.000 to 100 000.000
Horizontal expansion of the graphic window in [mm].
Default: 200 [mm]
Access: LEVEL1
Reaction: NOTHING
MP_outsideDiameter
Outside diameter of the blank
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: 0.000 to 100 000.000 [mm]
Outside diameter of the blank in [mm].
Default: 100 [mm]
Access: LEVEL1
Reaction: NOTHING
MP_blankLength
Workpiece blank length
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: 0.000 to 100 000.000 [mm]
Total length of the blank in [mm].
Default: 80 [mm]
Access: LEVEL1
Reaction: NOTHING
MP_rightBlankEdge
Oversize of the workpiece blank
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: –100 000.000 to +100 000.000
Oversize of the workpiece blank referenced to the workpiece
datum in [mm].
Default: 0 [mm]
Access: LEVEL1
Reaction: NOTHING
MP_insideDiameter
Inside diameter of the blank
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: For hollow cylinders: inside diameter [mm]
For solid workpieces: enter 0 [mm]
Default: 0 [mm]
Access: LEVEL1
Reaction: NOTHING