HEIDENHAIN MANUALPLUS 620 - Page 1450

1450 HEIDENHAIN Technical Manual MANUALplus 620
Dashboard display
of the parallel axes
(U, V, W)
 To be able to display the positions of the parallel axes in the dashboard, copy
the dashboard element DB_C1 located in CfgDashboardElemnt and
rename it to DB_U1, DB_V1 or DB_W1.
 Then enter the dashboard elements (DB_U1, DB_V1, DB_W1) into the
elementList of a dashboard display (e.g. DB_DEFAULT).
Settings in the configuration editor MP number
DisplaySettings
CfgDashboardElemnt
DB_U1
dashboardpicType: ActualCAxisValue
attribut: 0
entityList: U1
DB_V1
dashboardpicType: ActualCAxisValue
attribut: 0
entityList: V1
DB_W1
dashboardpicType: ActualCAxisValue
attribut: 0
entityList: W1
113100
113101
113102
113103
...
Settings in the configuration editor MP number
DisplaySettings
CfgDashboard
DB_DEFAULT
elementList
113200
113201