January 2012 8.5 Data Organization 1545
MP_compCfgFile
Path and name of the configuration file for the PLC compiler
Format: String
Input: Max. 260 characters
Path and name of the file
Example: %OEM%\BasisPgm\Programm\OEM.cfg
Default: –
Access: LEVEL3
Reaction: NOTHING
MP_keymapFile
Path and name of the configuration file for the keyboard
mapping.
(Value preset by HEIDENHAIN and should not be changed!)
Format: String
Input: Max. 260 characters
Path and name of the file
Default: %SYS%\resource\plckeymap_te530s.xml
Access: LEVEL3
Reaction: NOTHING
MP_magazineRules
Path and name of an ASCII file (*.TCR) with magazine rules
Available from NCK software version: 597 110-02.
Format: String
Input: Max. 260 characters
Path and name of the file
Example: %OEM%\plc\tchrules.tcr
Default: Optional input
Access: LEVEL3
Reaction: NOTHING
MP_pythonScripts
Python scripts to be started
Available from NCK software version: 597 110-05.
Format: Array [0...8]
Input: Key names of Python scripts from CfgPythonScript
Specifies which Python scripts are to be started automatically
after compilation of the PLC program.
Default: No value, parameter optional
Access: LEVEL2
Reaction: NOTHING
Be sure not to change the default value in MP_keymapFile, or proper
operation of the control can no longer be guaranteed.
To Next Page
Loading...
