HEIDENHAIN MANUALPLUS 620 - Page 483

January 2012 4.10 List of Machine Parameters 483
Versions
Software version of the PLC, software type and version of the NC
CfgPlcVersion
PLC program version
plcVersion
107301
PLC software version
Format: String
Input: Software version (max. 32
characters)
NOTHING
LEVEL2
–
versionText
Language-sensitive description for PLC version. Text name from the text resource file (for language-
sensitive texts) or texts that are understood in all languages.
dialogRes
107103
Name of a text
See entry under CfgColumnText/dialogText
NOTHING
LEVEL2
–
text
107103
Language-sensitive text
See entry under CfgColumnText/dialogText
NOTHING
LEVEL2
–
CfgNcVersion
Software version of the control;
The version is entered by HEIDENHAIN when the system is created.
[Key name for the exact software designation]
The HEIDENHAIN defaults are KERNEL and PRODUCT.
ncType
107501
Control model
Format: String
Input: Max. 16 characters,
e.g. "MANUALplus 620"
PLC/Pgm
run is
locked
LEVEL4
–
ncVersion
107502
NC software version
Format: String
Input: Version number of the NC software
PLC/Pgm
run is
locked
LEVEL4
–
CfgConfigVersion
Version of the configuration
configVersion
115501
Version code for config data
Format: String
Input: Max. 32 characters
PLC/Pgm
run is
locked
LEVEL3
–
versionText
115502
(optional parameter)
Description of the configuration
Format: String
Input: Max. 80 characters
PLC/Pgm
run is
locked
LEVEL3
–
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page