HEIDENHAIN MANUALPLUS 620 - Page 597

January 2012 4.10 List of Machine Parameters 597
DefGlobG147SCI
602013
Global safety clearance G147 in the plane
Specify here the default setting for the global safety
clearance in the plane for the START unit (SCI
parameter).
Format: Numerical value
Input: –999999999 to 999999999 [mm]
Max. 9 decimal places
Default: 2 [mm]
RUN
LEVEL1
1419
DefGlobG147SCK
602014
Global safety clearance G147 in infeed direction
Specify here the default setting for the global safety
clearance in infeed direction for the START unit
(SCK parameter).
Format: Numerical value
Input: –999999999 to 999999999 [mm]
Max. 9 decimal places
Default: 2 [mm]
RUN
LEVEL1
1419
DefGlobOverMeasI
602015
Global oversize in X direction
Specify here the default setting for the global safety
clearance in X direction for the START unit (I
parameter).
Format: Numerical value
Input: –999999999 to 999999999 [mm]
Max. 9 decimal places
Default: 0.5 [mm]
RUN
LEVEL1
1419
DefGlobOverMeasK
602016
Global oversize in Z direction
Specify here the default setting for the global safety
clearance in Z direction for the START unit (K
parameter).
Format: Numerical value
Input: –999999999 to 999999999 [mm]
Max. 9 decimal places
Default: 0.2 [mm]
RUN
LEVEL1
1419
DefaultM3M4
602017
Rotational direction for new units
Default for the spindle "direction of rotation MD" in
the "Tool" tab when creating/opening a new unit.
Format: Selection menu
Input: M3
M4
Default: M3
RUN
LEVEL1
1419
Parameter
MP number
iTNC MP number
Function and input Reaction/
Access
Page