January 2012 6.11 Machine Kinematics (As of NC Software 548328-03) 737
Last step: Assign the configured kinematics models to the machining
channel.
The settings for the machining channel (ChannelSettings/CH_NC1) must
include the kinematic models valid for this channel:
Open the CfgKinList configuration object. Enter in the
kinCompositeModels list parameter the key names of the kinematic
models for the machining channel.
Open the CfgAcitvateKinem configuration object. Choose from the
selection menu of the MP_kinemToActivate parameter the key name of
the kinematic model to be activated.
To Next Page
Loading...
