January 2012 1.3 NC Software 548 328-04 77
Module 9297:
Interrogate the status of a Python instance
The status of a Python instance that was started with Module 9295 can be
interrogated with Module 9297. Refer to the Python documentation.
Module 9311:
Dynamically change values for friction compensation
Module 9311 is used at run-time to prescribe other values for the friction
compensation. The original values from MP_compFriction0,
MP_compFrictionT1 and MP_compFrictionT2 are temporarily overwritten
in the DSP. The values in the machine configuration remain unchanged. See
page 726.
Module 9355:
Interrogate tool life
Module 9355 is used to request information about the tool life of the tool
used in an NC channel.
Module 9436:
Change the numeric value of a machine parameter persistently
Module 9436 is used to enter a numeric value in the indicated machine
parameter. The value of the machine parameter is overwritten in the run-
time memory, and the new value is stored persistently in the *.cfg file,
overwriting the previous value.
See page 395.
Module 9470:
Special operating modes and functions for commissioning
Module 9470 is used to interrogate the status and parameters of various
special operating modes and functions of an axis.
To Next Page
Loading...
