174 Keysight M8000 Series of BER Test Solutions User Guide
4 User Interface - M8020A Display Views
The following figure shows the System View of the M8046A module (M2):
The principal parts of the M8045A and M8046A System View are
represented by blocks which are connected by lines/arrows to show the
relationship of the blocks. These blocks are highlighted by blue lines
around the block on mouse focus. On clicking these blocks, the mostly
used parameters are available which can be configured using the
on-screen numeric keypad.
However, parameters corresponding to the selected block are displayed in
the Parameters window, on the right. The block may contain feature
elements (for example, HF Jitter contains PJ1, PJ2 and RJ). You can click
on the respective button to enable the feature elements. Once enabled,
the feature elements are highlighted in blue color. For more details, refer
to System View on page 156.
To Next Page
Loading...
Need help?
General
