Keysight Technologies M8000 Series User Manual

462 Keysight M8000 Series of BER Test Solutions User Guide
8 Working with Measurements
Lets discuss these GUI elements in the following sections.
Toolbar
The toolbar contains the following icons:
Table 64
Elements Name Description
Start
/Continue
Measurement
Starts a measurement.
Break
Measurement
Halts the measurement at that point. Once paused, you
can continue the measurement again by pressing Continue
Measurement icon.
Note: This option is not available in Error Ratio
Measurement.
Stop
Measurement
Stops the measurement.
Step Into
Measurement
Steps further into the measurement.
Note: This option is not available in Error Ratio
Measurement.
Enable/Disable
Measurement
Run History
Enables or disables the measurement run history. For
details, refer to
Measurement History Window
on page 463.
Clear
Measurement
History
Clears the measurement run history.
Copy
Measurement
History
Properties
Copies the measurement history properties to the currently
running measurement.
Reset
Measurement
Resets the measurement to its default values.

Keysight Technologies M8000 Series Specifications

General

Brand	Keysight Technologies
Model	M8000 Series
Category	Test Equipment
Language	English