Keysight M8000 Series of BER Test Solutions User Guide 197
User Interface - M8020A Display Views 4
How to perform a basic measurement
Follow the given steps to perform a basic measurement using a Setup
View:
1Open the Setup View window.
2 From the block diagram, select the channel for the “Clock and Pattern
Generator” and “Analyzer-Detector” pane.
3 Use the available functional blocks to configure the required
parameters for the “Clock and Pattern Generator” and
“Analyzer-Detector” pane.
4Click Auto Align button to start the BER threshold auto alignment.
Click Manual Alignment… button, in case the manually aligning of the
sampling point is required.
5 Select the measurement. It will take you to the respective
measurement window.
6 Run the measurement. You will see the measurement preview on the
“Analyzer-Detector” pane.
To Next Page
Loading...
