Keysight Technologies M8000 Series User Manual

602 Keysight M8000 Series of BER Test Solutions User Guide
9 Utilities
Settings Window
The Settings window allows you to set the display and channel settings in
the GUI. In addition, you can use this dialog to enable/disable Parameter
hint dialog on the GUI startup.
To open the Settings window, go to Menu Bar > Utilities and then select
Settings.... The Setting window will appear as shown in the following
figure:
The Settings window has the following tabs:
• Display tab
• Channel tab
• Hints tab
These tabs are described in the section, that follows.

Keysight Technologies M8000 Series Specifications

General

Brand	Keysight Technologies
Model	M8000 Series
Category	Test Equipment
Language	English