6 Keysight M8000 Series of BER Test Solutions User Guide
About This Guide
Here is how the information in this document is organized.
Introduction
This chapter provides an overview of this manual.
Know Your Hardware
This chapter provides an information on the various modules of
M8020A/M8030A/M8040A, their setup and the provided accessories.
Exploring M8070A User Interface
This chapter describes the M8070A user interface and the functionality provided by its
common GUI elements.
Configuring Your System
This chapter describes how to configure the M8020A/M8030A/M8040A system using the
Module View, Group View and System View.
Setting up Generator
This chapter provides information on settings provided by the M8020A/M8030A/M8040A
Generator.
Setting up Analyzer
This chapter provides information on settings provided by the M8020A/M8030A/M8040A
Analyzer.
Setting up Patterns
This chapter describes the functionality provided by the M8070A Pattern Editor and
Sequence Editor.
Working with Measurements
This chapter describes the setup, execution, monitoring and results of the measurements
supported by M8070A system software.
Utilities
This chapter describes the utilities provided by the M8070A system software.
Licenses
This chapter provides information on the M8020A/M8030A/M8040A and M8070A
licenses and their installation procedure.
Appendix
This chapter provides information about basic troubleshooting and factory patterns.
To Next Page
Loading...
Need help?
General
