Keysight Technologies M8000 Series - Self Test Utility; Launching the Self Test Utility

596 Keysight M8000 Series of BER Test Solutions User Guide
9 Utilities
Self Test Utility
The Self Test utility checks the specific system information of the
hardware components for basic functionality. On execution, the following
results are displayed:
• System related information such as connected modules, serial no. and
hardware revision.
• Module related information such as calibration, power supplies and
memory controller.
Launching the Self Test Utility
To launch the Self Test:
•Go to the Menu Bar > Utilities and then select Self Test.
The Self Test utility will appear as shown in the following figure:
The Self Test utility consists of the following GUI elements:
•Toolbar
• Self Test History
• Self Test Results Window