4 Keysight M8000 Series of BER Test Solutions User Guide
Safety Symbols
Table 1 Safety Symbol
Symbol Description
Indicates warning or caution. If you see this symbol on a
product, you must refer to the manuals for specific
Warning or Caution information to avoid personal injury
or damage to the product.
Frame or chassis ground terminal. Typically connects to
the equipment’s metal frame.
Indicates hazardous voltages and potential for electrical
shock.
Indicates that antistatic precautions should be taken.
Indicates hot surface. Please do not touch.
Indicates laser radiation turned on.
CSA is the Canadian certification mark to demonstrate
compliance with the Safety requirements.
CE compliance marking to the EU Safety and EMC
Directives.
ISM GRP-1A classification according to the
international EMC standard.
ICES/NMB-001 compliance marking to the Canadian
EMC standard.
To Next Page
Loading...
Need help?
General
