Keysight Technologies M8000 Series User Manual

Keysight M8000 Series of BER Test Solutions User Guide 427
Setting up Patterns 7
134 Reset Scrambler Scrambler reset (ignored on DataIn)
135 Pause Scrambler Scrambler pause (ignored on DataIn)
136 Bypass Scrambler Scrambler bypass
137 Bypass Byte 0
Scrambler
Scrambler bypass byte 0
138 Do DC Balancing Do DC balancing (ignored on DataIn)
139 Reset DC Balancing Reset DC balancing (ignored on DataIn)
140 Send Scrambler
State
Send scrambler state (ignored on DataIn)
141 Reset Parity Reset Parity (ignored on DataIn)
142 Pause Parity Pause Parity (ignored on DataIn)
143 Start of Frame Start of Frame (ignored on DataOut)
Bit offset range Bit (range) name Description
NOTE
When using 128/132 coding pattern contains Sync Symbols to achieve
Symbol Alignment. These Sync Symbols need to be at least 16 symbols
apart.

Keysight Technologies M8000 Series Specifications

General

Brand	Keysight Technologies
Model	M8000 Series
Category	Test Equipment
Language	English