580 Keysight M8000 Series of BER Test Solutions User Guide
9 Utilities
M8000.Instrument.Analyzer.DataCenter(groupOrLocationName)
Executes a data-center alignment on the addressed locations.
M8000.Instrument.Analyzer.ThresholdCenter(groupOrLocationName)
Executes a threshold-center alignment on the addressed locations.
M8000.Instrument.Analyzer.SyncNow(groupOrLocationName)
Executes a pattern synchronization on the addressed locations.
M8000.Instrument.Analyzer.GetBitCounters(groupOrLocationName,
combineIntoOneResult)
Read the bit counters from the addressed locations and return either the
sum of all addressed counters, or each addressed counter individually.
M8000.Instrument.Analyzer.GetDataLoss(groupOrLocationName,
combineIntoOneResult)
Read the data loss status bit from the addressed locations and return
either the logical OR of all addressed locations, or each location's status
individually.
M8000.Instrument.Analyzer.GetSyncLoss(groupOrLocationName,combi
neIntoOneResult)
Read the sync loss status bit from the addressed locations and return
either the logical OR of all addressed locations, or each location's status
individually.
M8000.Instrument.Analyzer.GetSymbolLoss(groupOrLocationName,co
mbineIntoOneResult)
Read the symbol loss status bit from the addressed locations and return
either the logical OR of all addressed locations, or each location's status
individually.
To Next Page
Loading...
Need help?
General
