Keysight M8000 Series of BER Test Solutions User Guide 661
Appendix 11
IEEE
Pattern Description
JP03A_bit IEEE802.3bj clause 94.2.9.1 for 100GBASE-KP4. The
JP03A test pattern is generated prior to PAM4
encoding. JP03A pattern is a repeating (0,3)
sequence.
JP03B_bit IEEE802.3bj clause 84.2.9.2 for 100GABSE-KP4. The
JP03B test pattern is generated prior to PAM4
encoding. The JP03B pattern is a repeating
sequence of (0,3) repeated 15 times followed by
(3,0) repeated 16 times.
PAM4_Linearity_Test_bit IEEE 802.3bj clause 94.2.9.4 transmitter linearity
test pattern. To get correct output symbols the
respective generator needs to have Uncoded
selected.
PRBS13Q_Lane0_bit PRBS13Q Lane 0 pattern as defined in IEEE 802.3
clause 120.5.11.2.3. To get correct output symbols
the respective generator needs to have Gray Coding
selected.
PRBS13Q_Lane1_bit PRBS13Q Lane 1 pattern as defined in IEEE 802.3
clause 120.5.11.2.3. To get correct output symbols
the respective generator needs to have Gray Coding
selected.
PRBS13Q_Lane2_bit PRBS13Q Lane 2 pattern as defined in IEEE 802.3
clause 120.5.11.2.3. To get correct output symbols
the respective generator needs to have Gray Coding
selected.
PRBS13Q_Lane3_bit PRBS13Q Lane 3 pattern as defined in IEEE 802.3
clause 120.5.11.2.3. To get correct output symbols
the respective generator needs to have Gray Coding
selected.
QPRBS13_Lane0_bit_SelectGrayCoded QPRBS13 Lane 0 pattern as defined in IEEE 802.3
clause 94.2.9.3. To get correct output symbols the
respective generator needs to have Gray Coding
selected.
SSPRQ_bit_SelectGrayCoded SSPRQ pattern as defined in IEEE 802.3 clause
120.5.11.2.5. To get correct output symbols the
respective generator needs to have Gray Coding
selected.
To Next Page
Loading...
Need help?
General
