Omron FQ2-S/CH Series

Adjusting the Images That Were Taken
FQ2-S/CH User’s Manual
113
3
Taking Images
• Measurement Data That Can Be Used for External Outputs and Calculations
The following values can be used as measurement data and output to external devices via Ethernet or used in
calculations.
• Measurement Data That Can Be Logged
The values below can be logged as measurement data.
Expression
text string
Data name Description Data range
JG Judgement This is the judgement result.
-2: No judgement (not measured)
0: Judgement is OK
-1: Judgement is NG
DX Scroll X This is the amount of position
compensation for the X coordinate.
-99,999.9999 to 99,999.9999
DY Scroll Y This is the amount of position
compensation for the Y coordinate.
-99,999.9999 to 99,999.9999
X Position X
(edge position X)
This is the X coordinate of the
measured edge position.
-99,999.9999 to 99,999.9999
Y Position Y
(edge position Y)
This is the Y coordinate of the
measured edge position.
-99,999.9999 to 99,999.9999
SX Reference X This is the X coordinate of the edge
position when it was registered.
-99,999.9999 to 99,999.9999
SY Reference Y This is the Y coordinate of the edge
position when it was registered.
-99,999.9999 to 99,999.9999
Parameter Setting Description
Judgement
-2: No judgement (not measured)
0: Judgement is OK
-1: Judgement is NG
This is the judgment result.
Scroll X -99,999.9999 to 99,999.9999 This is the amount of position compensation for the X
coordinate.
Scroll Y -99,999.9999 to 99,999.9999 This is the amount of position compensation for the Y
coordinate.
Position X
(edge position X)
-99,999.9999 to 99,999.9999 This is the X coordinate of the measured edge
position.
Position Y
(edge position Y)
-99,999.9999 to 99,999.9999 This is the Y coordinate of the measured edge
position.