Omron FQ2-S/CH Series User Manual

Adjusting the Images That Were Taken
112
FQ2-S/CH User’s Manual
[Image] − [Image adjustment]
• Detailed Settings for Edge Position Compensation
The settings for the Edge Position Compensation item are almost the same as those for the Edge Position
inspection item.
Make the settings for teaching and the judgment conditions in the same way as for the Edge Position
inspection item.
4-12 Inspecting with the Edge Position Inspection Item: p. 271
However, the following settings are included only in the Edge Position Compensation Item.
• Source Image
You can select the image to which to apply the results of position compensation processing.
Applying the Results of Position Compensation: p.104
• Interpolation
You can select the precision of position compensation.
If you select [Bilinear], the precision of position compensation will increase.
[Image] − [Image adjustment] − [Edge position comp.] − [Modify] − [Details] - [Scroll parameter]
− [Interpolation]
The settings are the same as those for the Shape Search Position Compensation item.
Interpolation: p. 108
1 Press an unused number and then press [Add pos. comp.].
2 Press [Edge] − [Edge position comp.].
3 Make any detailed settings as required for the position compensation processing.
Refer to Detailed Settings for Edge Position Compensation, below.
4 Press [OK].
5 Press [Back].

Omron FQ2-S/CH Series Specifications

General

Brand	Omron
Model	FQ2-S/CH Series
Category	Digital Camera
Language	English