Omron FQ2-S/CH Series

Adjusting the Images That Were Taken
120
FQ2-S/CH User’s Manual
• Measurement Data That Can Be Used for External Outputs and Calculations
The following values can be used as measurement data and output to external devices via Ethernet or used in
calculations.
Expression
text string
Data name Description Data range
JG Judgement This is the judgement result.
-2: No judgement
(not measured)
0: Judgement is OK
-1: Judgement is NG
-15: Out of range error
DX Scroll X This is the amount of position
compensation for the X
coordinate.
-99,999.9999 to 99,999.9999
DY Scroll Y This is the amount of position
compensation for the Y
coordinate.
-99,999.9999 to 99,999.9999
X0 Edge 0 position X This is the X coordinate of the
measured edge 0 position.
-99,999.9999 to 99,999.9999
Y0 Edge 0 position Y This is the Y coordinate of the
measured edge 0 position.
-99,999.9999 to 99,999.9999
X1 Edge 1 position X This is the X coordinate of the
measured edge 1 position.
-99,999.9999 to 99,999.9999
Y1 Edge 1 position Y This is the Y coordinate of the
measured edge 1 position.
-99,999.9999 to 99,999.9999
MX Midpoint X This is the X coordinate of the
measured edge midpoint position.
-99,999.9999 to 99,999.999
MY Midpoint Y This is the Y coordinate of the
measured edge midpoint position.
-99,999.9999 to 99,999.999
SX0 Edge0 ref. position X
(edge 0 reference position X)
This is the X coordinate of the
edge 0 position when it was
registered.
-99,999.9999 to 99,999.9999
SY0 Edge0 ref. position Y
(edge 0 reference position Y)
This is the Y coordinate of the
edge 0 position when it was
registered.
-99,999.9999 to 99,999.9999
SX1 Edge1 ref. position X
(edge 1 reference position X)
This is the X coordinate of the
edge 1 position when it was
registered.
-99,999.9999 to 99,999.9999
SY1 Edge1 ref. position Y
(edge 1 reference position Y)
This is the Y coordinate of the
edge 1 position when it was
registered.
-99,999.9999 to 99,999.9999
SMX Ref. Midpoint X
(reference midpoint X)
This is the X coordinate of the
midpoint of the two edges when
they were registered.
-9,999.9999 to 99,999.9999
SMY Ref. Midpoint Y
(reference midpoint Y)
This is the Y coordinate of the
midpoint of the two edges when
they were registered.
-9,999.9999 to 99,999.9999