Omron FQ2-S/CH Series

Adjusting the Images That Were Taken
FQ2-S/CH User’s Manual
121
3
Taking Images
• Measurement Data That Can Be Logged
The values below can be logged as measurement data.
Parameter Setting Description
Judgement
-2: No judgement (not measured)
0: Judgement is OK
-1: Judgement is NG
-15: Out of range error
This is the judgement result.
Scroll X -99,999.9999 to 99,999.9999 This is the amount of position compensation for the X
coordinate.
Scroll Y -99,999.9999 to 99,999.9999 This is the amount of position compensation for the Y
coordinate.
Midpoint X -99,999.9999 to 99,999.999 This is the X coordinate of the measured edge midpoint
position.
Midpoint Y -99,999.9999 to 99,999.999 This is the Y coordinate of the measured edge midpoint
position.
Edge 0 position X -99,999.9999 to 99,999.9999 This is the X coordinate of the measured edge 0 position.
Edge 0 position Y -99,999.9999 to 99,999.9999 This is the Y coordinate of the measured edge 0 position.
Edge 1 position X -99,999.9999 to 99,999.9999 This is the X coordinate of the measured edge 1 position.
Edge 1 position Y -99,999.9999 to 99,999.9999 This is the Y coordinate of the measured edge 1 position.