Omron FQ2-S/CH Series

Setting the Retry Function
424
FQ2-S/CH User’s Manual
Setting exposure retry
• Set the retry mode to [Exposure retry] in "Retry details".
(Setup Mode) − [Sensor settings] − [Retry details]
• Set the brightness (shutter speed) step, increment count, and decrement count.
[Inspect] − [Retry details]
1 Press [Exposure retry] for the retry mode.
1 Set the brightness (shutter speed) step, incre-
ment count, and decrement count.
Parameter Settings Description
Brightness
(shutter speed) step
Brightness: 1 to 20 (Default: 5)
Shutter speed: 0.01 to 1.00
(Default: 0.30)
Sets the brightness or shutter speed step (msec).
Increment count 0 to 10 (Default: 2) Sets the brightness (shutter speed) increment count.
Decrement count 0 to 10 (Default: 2) Sets the brightness (shutter speed) decrement count.