Omron FQ2-S/CH Series

Setting the Retry Function
FQ2-S/CH User’s Manual
425
7
Convenient Functions
Setting scene retry
• Set the retry mode to [Scene retry] in "Retry details".
(Setup Mode) − [Sensor settings] − [Retry details]
1 Press [Scene retry] for the retry mode.
2 Set the switch order.
3 Set the scenes that are switched through.
Parameter Settings Description
Switch Order Auto (Default)
Fixed
Sets the scene switching order.
Auto: Switches through the scenes in the order of highest frequency of use.
Fixed: Switches through the scenes in the order that the scenes were registered
for scene switching.
Retry scene 1st to 32nd
Register the scenes for scene switching.
Register the scenes to switch in order from "1st" If there are any scenes for scene
switching that are not registered, the remaining scenes are ignored.