Omron FQ2-S/CH Series

Menu Tables
FQ2-S/CH User’s Manual
439
Appendices
9
Camera setup
Partial input Used to make the image input range
smaller.
• 752×8 to 752×480
FQ2-S1
FQ2-S2
FQ2-S4
FQ2-S4-M
FQ2-CH
• 928×8 to 928×828
FQ2-S-08
FQ2-S4-08
• 1280×8 to 1280×1024
FQ2-S3-8
FQ2-S4-
Scene p. 343
Rotate 180 You can rotate the Camera image by 180 ° . •ON
• OFF (Default)
Scene p. 86
Calibration setting Sets a registered calibration pattern. • Off (Default)
Calibration Data 0 to 31
Scene p. 379
Lighting control Turns off built-in lighting when external
lighting is used.
• ON (Default)
• OFF
Scene p. 427
Lightning control
Strobe output delay
Sets the delay time for the strobe output
signal (STGOUT) in response to the trig-
ger signal.
0 to 65,535 μs (Default: 0 μs) Scene ---*
1
Strobe output time Sets the output time of the strobe output
signal (STGOUT).
0 to 65,535 μs (Default: 1,000 μs) Scene ---*
1
Trigger setup
Trigger delay
Adjusts the time until the Camera shutter
opens after the trigger signal is received.
Only valid for external triggers.
0 to 163 ms (Default: 0) System p. 87
Image adjustment
Add filter
These commands are used to add, mod-
ify, delete, copy, or change the name of
filter items and position compensation
items.
• Color Gray Filter
• Weak Smoothing
• Strong Smoothing
•Dilate
•Erosion
• Median
• Extract Edges
• Extract Horiz
• Edges
• Extract vertical edges
• Enhance edges
• Background Suppression
Scene p. 94
Add pos.
comp.
Model
• Shape Sear lll. pos. comp
• Shape Sear. pos. comp
• Search position comp
Scene p. 102
Edge
• Edge position comp
• 2Edge position comp
• 2ed. midp. comp
• Edge rot. pos. Comp
Scene p. 102
Value Position compensation
(Image rotation,Parameter)
Scene p. 102
Modify --- --- p. 94
Delete --- --- p. 94
Copy --- --- p. 94
Rename 15 alphanumeric characters Scene p. 94
Menu command Description Setting range Data