Omron FQ2-S/CH Series

Adjusting the Images That Were Taken
96
FQ2-S/CH User’s Manual
Setting the Filter Type (for Color Gray Filter Only)
You can specify the ranges of colors to which the Color Gray Filter item is applied.
[Image] − [Image adjustment] − [Add filter] − [Color Gray Filter]
1 Press [ ] − [Filter type] on the right of the display.
2 Set the filter type to either [RGB] or [HSV].
3 Press [ ] − [Filter settings] on the right of the display.
4 Make the detailed filter settings.
•RGB
Select the type of color filter to use.
If you select [Custom filter], set the gains for red, green,
and blue.
•HSV
Set the following ranges: [Std. Hue], [Hue range], and
[Chroma].
Parameter Description
RGB
(Default)
The red, green, and blue extraction
ranges are specified.
HSV The extracted color ranges are specified
with the hue and chroma (saturation).