Ricoh B079 - Developer

DEVELOPMENT
B079/B082 3-36 SM
3.12.4 DEVELOPER
1. Development unit (! 3.12.1)
2. Remove the development roller (! 3.12.3)
3. Empty toner [A]
4. Turn drive gear [B] to ensure that no developer remains in the unit or on the
developer roller.
NOTE: Dispose of the used developer in accordance with local regulations.
Work carefully to avoid scratching or nicking the development roller.
5. Pour approximately 1/3 of the developer [C] evenly along the length of the
development unit.
6. Rotate the drive gear [D] to work the developer into the unit. Repeat steps 5
and 6 until all of the developer is in the unit and level with the edges.
B004R404.WMF
B004R405.WMF
[A]
[B]
[D]
[C]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA