Ricoh B079 - Drum Charge Roller Cleaning; ID Sensor Pattern Production Timing

DRUM CHARGE
B079/B082 6-58 SM
6.8.4 ID SENSOR PATTERN PRODUCTION TIMING
An ID sensor pattern is created after the main machine is powered on, and after
finishing a job of 10 or more sheets.
The ID sensor pattern production interval can be adjusted with SP2-210 (ID Sensor
Pattern Interval).
6.8.5 DRUM CHARGE ROLLER CLEANING
The drum charge roller [A], always in contact with the drum, gets dirty easily, so the
cleaning pad [B] also remains in contact with the charge roller to clean it. The pin
[C] in contact with the cam gear [D] enables the gear to move the cleaning pad
from side to side and improve cleaning.
New Vref Decisio
n
........
1109832
Vref Decision
132
........
12 151413
Series of copies
ID sensor pattern
Vsp/Vsg
ID sensor pattern
Vsp/Vsg
New Vref Decision
B004D535.WMF
B004D303.WMF
[A]
[B]
[C]
[D]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA