SERVICE PROGRAM MODE
B547 38 SM
SP5-XXX (Initializing)
5
Mode No. Function
Initialize SRAM 101
000
Initializes the bit switches and user
parameters, user data in the SRAM, files in
the SAF memory, and clock.
Erase All Files 102
000 Erases all files stored in the SAF memory.
Reset Bit Switches 103
000
Resets the bit switches and user
parameters.
Factory setting 104
000
Resets the bit switches and user
parameters, user data in the SRAM and
files in the SAF memory.
SP6-XXX (Reports)
6
Mode No. Function
System Parameter List 101
000
Touch the “ON” button to print the system
parameter list.
Service Monitor Report 102
000
Touch the “ON” button to print the service
monitor report.
103 G3 Protocol Dump List
001
G3 All
Communications
Prints the protocol dump list of all
communications for all G3 lines.
002
G3-1 (All
Communications)
Prints the protocol dump list of all
communications for the G3-1 line.
003
G3-1 (1
Communication)
Prints the protocol dump list of the last
communication for the G3-1 line.
004
G3-2 (All
Communications)
Prints the protocol dump list of all
communications for the G3-2 line.
005
G3-2 (1
Communication)
Prints the protocol dump list of the last
communication for the G3-2 line.
006
G3-3 (All
Communications)
Prints the protocol dump list of all
communications for the G3-3 line.
007
G3-3 (1
Communication)
Prints the protocol dump list of the last
communication for the G3-3 line.
104 G4 Protocol Dump List
001 Dch + Bch 1
Prints the protocol dump lists for the G4
line. Japan Only
002 Dch
003 Bch 1 Link Layer
004 Dch Link Layer
005 Dch +Bch 2
006 Bch 2 Link Layer
To Next Page
Loading...
