Ricoh B079 - Page 221

Trouble-
shooting
SERVICE CALL CONDITIONS
SM 4-23 B079/B082
07: Connector error
1) The connector of the shutter guide HP sensor is not connected.
2) The connector of the folder plate HP sensor is not connected.
3) The connector of the folder plate return sensor is not connected.
- Possible causes -
• Poor connection or no connection of the shutter guide HP sensor connector
• Poor connection or no connection of the folder plate HP sensor connector
• Poor connection or no connection of the folder plate return sensor connector
08: Switch error
1) When the booklet entrance guide sensor, lower door sensor and booklet exit
cover sensor are all activated (doors closed), the booklet entrance guide
safety switch does not turn on within 1s after a copy job or warm-up idling
begins.
2) When the booklet entrance guide sensor, lower door sensor and booklet exit
cover sensor are all activated (doors closed), the lower door safety switch
does not turn on within 1s after a copy job or warm-up idling begins.
3) When the booklet entrance guide sensor, lower door sensor and booklet exit
cover sensor are all activated (doors closed), the booklet exit cover safety
switch does not turn on within 1s after a copy job or warm-up idling begins.
- Possible causes -
• Booklet entrance guide safety switch defective
• Lower door safety switch defective
• Booklet exit cover safety switch defective
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA