Rohde & Schwarz MXO 4 Series - Page 759

Remote control commandsMXO 4 Series
759User Manual 1335.5337.02 ─ 07
Parameters:
<Enable> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "Frame type" on page 360
SBUS<sb>:UART:FILTer:FIENable <Frame>,<Field>,<Enabler>
SBUS<sb>:UART:FILTer:FRAMe<fr>:FLD<fl>:ENABle <CondEnabler>
Enables or disables the checking condition for the selected field of the selected frame.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
<fl> index of the field
Parameters:
<CondEnabler> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Edit" on page 360
17.16.4.4 Decode results
SBUS<sb>:UART:WORD<w>:BITRate?........................................................................... 759
SBUS<sb>:UART:WORD<w>:COUNt?.............................................................................760
SBUS<sb>:UART:WORD<w>:RXValue?.......................................................................... 760
SBUS<sb>:UART:WORD<w>:SOURce?.......................................................................... 760
SBUS<sb>:UART:WORD<w>:STARt?..............................................................................761
SBUS<sb>:UART:WORD<w>:STOP?.............................................................................. 761
SBUS<sb>:UART:WORD<w>:STATe?..............................................................................761
SBUS<sb>:UART:WORD<w>:TXValue?...........................................................................762
SBUS<sb>:UART:WORD<w>:BITRate?
Returns the primary bit rate.
Suffix:
<sb>
.
1...4, index of the serial bus
<w> index of the word
Return values:
<PrimaryBitRate> Range: 0 to 100000000000
Increment: 1
*RST: 0
Default unit: bps
Protocols