RTC6 boards
Doc. Rev. 1.0.21 en-US
2 Product Overview
36
Caution!
• Do not operate the RTC6 PCIe Board outside of
the PC.
• The RTC6 PCIe Board is intended only for
industrial usage. It is designed to be
incorporated in machines (normally laser
systems). It does not meet all criteria of ready-
to-use products. Do not operate the
RTC6 PCIe Board unless it is incorporated in a
machine which itself complies with the
regulations of all applicable standards and
directives (of the country concerned). It is not
suitable to be used as toy, in household or under
unfavourable environment conditions (for
example, in the open). Appropriate precautions
to avoid such unforeseeable misapplications
must be taken by users.
• Installation and operation must only be
performed by trained specialists, among other
things knowledgeable in the safe and proper
use of electrical devices. Only carry out
installation and maintenance work when supply
voltages and lasers have been switched off.
• The RTC6 PCIe Board is a class A product. In a
domestic environment this product may cause
radio interferences in which case the user may
be required to take adequate measures.
To Next Page
Loading...