Scanlab RTC6 PCIe Board - Set_Softstart_Level; Set_Softstart_Level_List

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
742
innovators for industry
Ctrl Command set_softstart_level
Function No function.
Call set_softstart_level( Index, Level )
Parameters Index As an unsigned 32-bit value.
Level As an unsigned 32-bit value.
Comments • set_softstart_level has no effect on the user program.
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References set_softstart_level_list
Normal List
Command
set_softstart_level_list
Function No function.
Call set_softstart_level_list( Index, Level1, Level2, Level3 )
Parameters Index Like set_softstart_level.
Level1 Like set_softstart_level.
Level2 Like set_softstart_level.
Level3 Like set_softstart_level.
Comments • See set_softstart_level.
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References set_softstart_level