RTC6 boards
Doc. Rev. 1.0.21 en-US
2 Product Overview
47
2.9 Supplementary Software
To facilitate customizing RTC correction files basing
on data of your own test measurements, SCANLAB
offers the correXion pro software with
accompanying manual, see also Section ”Image Field
Correction Algorithm”, page 174.
By using the SCANLAB laserDESK software, own laser
marking and material-processing programs
(“laser jobs“) can be created and executed without
software development. Many of the RTC6 functions
are supported.
(1)
For further information on laserDESK, refer to the
SCANLAB homepage.
(1) See also Notice!, page 73.
To Next Page
Loading...