Scanlab RTC6 PCIe Board - Set_Mcbsp_Out_Ptr_List

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
698
innovators for industry
Multiple List
Command
set_mcbsp_out_ptr_list
Function Like set_mcbsp_out_ptr, but a list command.
Call set_mcbsp_out_ptr_list( Number, SignalPtr )
Parameters Number Like set_mcbsp_out_ptr.
SignalPtr Like set_mcbsp_out_ptr.
Comments • set_mcbsp_out_ptr_list requires two RTC6 List Memory positions for Number  1.
Sequence of execution:
1. Pending delayed short list commands
2. First command part as an undelayed short list command
3. Second command part as a normal list command
• See set_mcbsp_out_ptr.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 632, OUT 633.
References set_mcbsp_out_ptr