Scanlab RTC6 PCIe Board - Mark_Time_Abs

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
542
innovators for industry
Normal List
Command
mark_time_abs
Function Marks a part of the time previously stored by time_fix, time_fix_f or time_fix_f_off in the
specified format at the current position. In the called indexed text strings or characters (see
below), any absolute Vector Commands and “Arc” Commands receive an offset (based on
the current coordinates at the time of the call).
Call mark_time_abs( Part, Mode )
Parameters Part See mark_time.
Mode See mark_time.
Comments • mark_time_abs has the same effect as mark_time; however, internal calling of the
indexed text strings (or characters) is by list_call_abs instead of list_call.
• If the command lists of the called indexed text strings (or characters) contain no
absolute commands, then there is no difference between mark_time_abs and
mark_time.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References mark_time