Scanlab RTC6 PCIe Board - Mark_Text_Abs

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
539
innovators for industry
Variable
List Command
mark_text_abs
Function Marks a \0-terminated string. In the called indexed characters (see below), any absolute
Vector Commands and “Arc” Commands receive an offset (based on the current
coordinates at the time of the call).
Call mark_text_abs( Text )
Parameters Text PC memory address of the first character (byte) of the to-be-marked text
string. As a pointer to a \0-terminated string.
Comments • During processing of the individual mark_text_abs, the corresponding
mark_char_abs (indexed characters) are executed in accordance with the selected
character set.
• If the command list of the called indexed character contains no absolute commands,
then there is no difference between mark_text_abs and mark_text.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References mark_text