Scanlab RTC6 PCIe Board - Product Overview; Labeling; Unpacking Instructions and Typical Scope of Delivery; Delivered RTC6 Software Package

RTC6 boards
Doc. Rev. 1.0.21 en-US
2 Product Overview
31
innovators for industry
2 Product Overview
2.1 Labeling
The serial number of the RTC6 PCIe Board is printed
on a label attached to the board.
The article number and configuration of the board
are described in the packaging list, see Chapter 2.6
”Options”, page 38, and Chapter 2.7 ”Jumper
Settings and Type Designations”, page 40.
2.2 Unpacking Instructions and
Typical Scope of Delivery
(1) Carefully remove the RTC6 PCIe Board from the
package.
(2) Keep the packaging, including the antistatic bag
the RTC6 PCIe Board is delivered in, so that in case
of repair the board can be properly repackaged
and returned to SCANLAB.
(3) Also remove all other articles from the package.
Check that all parts have been delivered. Refer to
the corresponding packaging list.
The scope of delivery typically includes an
RTC6 PCIe Board and a data CD (with the
RTC6 Software Package, see below, and this
manual). Possibly additional components are also
contained, see Chapter 2.8 ”Accessories for the
RTC6 PCIe Board”, page 44.
2.3 Delivered
RTC6 Software Package
• See also Chapter 19 ”Appendix D: RTC6 Software
Packages – History”, page 939.
The delivered RTC6 Software Package contains the
RTC6 board driver
(1)
for the 32-bit and 64-bit versions
of the operating systems Microsoft Windows 10, 8, 7.
Windows XP and Windows Vista are not supported!
Observe the safety notice on legacy RTC board drivers
in Chapter 2.5.2 ”Software”, page 37.
The data CD contains all files as unzipped versions.
The complete RTC6 Software Package is also
delivered zipped for easy identification and
management of different software versions:
• RTC6_Software_Package_Rev.n.n.n_<Datum>.zip
The content of the RTC6 Software Package is as
follows:
• Readme.txt
Description in English
• Liesmich.txt
Description in German
• IMPORTANT_RELEASE_NOTES.txt
Bilingual English and German
• RTC6_Release_Notes_Rev.n.n.n.pdf
Mentions known restrictions.
Bilingual English and German
• Folder Correction Files
• Folder CorrectionFileConverter
• Folder Demo Files
• Folder HPGL
• Folder iSCANCfg
• Folder RTC6 Driver
• Folder RTC6 Files
• Folder RTC6 Tools
(1) The RTC6 board driver is not required for
RTC6 Ethernet Boards.