Scanlab RTC6 PCIe Board - Quit_Loop

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
574
innovators for industry
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change DLL 605, OUT 605: endless toggling with Count = 2
32
–1.
References periodic_toggle, set_port_default
Undelayed
Short List
Command
periodic_toggle_list
Ctrl Command quit_loop
Function Stops the repeating automatic list change started with start_loop.
Call quit_loop()
Comments • Before list execution is stopped, the current list is fully executed until the next
set_end_of_list is encountered.
• start_loop must be called prior to quit_loop. Otherwise, quit_loop has no effect.
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References start_loop