Scanlab RTC6 PCIe Board - Get_Overrun

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
419
innovators for industry
Ctrl Command get_overrun
Function Returns the number of overruns of the 10 µs clock cycle since the last call and resets the
overrun counter.
Call NumberOfOverruns = get_overrun()
Result Number of overruns of the 10 µs clock cycle since the last call of get_overrun. As an
unsigned 32-bit value.
Comments • See Section ”Clock Overruns”, page 182.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References –