Scanlab RTC6 PCIe Board - Glossary and Abbreviations

RTC6 boards
Doc. Rev. 1.0.21 en-US
1 About this Manual
26
innovators for industry
1.3 Glossary and Abbreviations
[*]mark[*] Command All commands with “mark” as part of their names.
See Section ”Mark Commands”, page 137.
[*]para[*] Command All commands with “para” as part of their names.
See Section ”[*]Para[*] Commands”, page 139.
3D Image Field Synonym: working volume (process volume).
See Chapter 7.3.4 ”3D Image Field”, page 170.
“Arc” Command Umbrella term for Arc Commands and Ellipse Commands.
Answer Telegram In context with Remote Interface Mode:
telegram from RTC6 Ethernet Board, see telegrams.h .
Consists of header and payload.
BCD Binary Coded Decimal.
BIOS Basic Input/Output System. Is permanently stored in the Flash
Memory of the RTC6 board. See also RTC6conf.exe .
BUSY Pin Pin with BUSY OUT signal (= BUSY list execution status).
• RTC6 PCIe Board:
– LASER Connector, page 73
– EXTENSION 1 Socket Connector, page 78
• RTC6 Ethernet Board:
– LASER Socket Connector, page 882
– EXTENSION 1 Socket Connector, page 890
Command Telegram In context with Remote Interface Mode:
telegram to RTC6 Ethernet Board, see telegrams.h .
Consists of header and payload.
Data Streaming See RtcStreamParser-DLL – Application Programming Interface
Manual, Brief information Data Streaming.
DSP Digital signal processor on the RTC6 board.
Dynamic Focusing Unit This includes, for example, the following SCANLAB products:
varioSCAN, varioSCAN
de
, varioSCAN FC and varioSCAN FLEX,
excelliSHIFT.
Ethernet Link Loss The cable connection to the RTC6 Ethernet Board has been
disconnected.