Scanlab RTC6 PCIe Board - Set_Multi_Mcbsp_In_List

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
704
innovators for industry
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change DLL 617, OUT 617: compatibility with “Fly Extension” Commands.
Comments set_multi_mcbsp_in_list, read_multi_mcbsp, set_wobbel_control, set_wobbel_vector
Ctrl Command set_multi_mcbsp_in
Normal List
Command
set_multi_mcbsp_in_list
Function Like set_multi_mcbsp_in, but a list command.
Restriction Like set_multi_mcbsp_in.
Call set_multi_mcbsp_in_list( Ctrl, P, Mode )
Parameters Ctrl Like set_multi_mcbsp_in.
P Like set_multi_mcbsp_in.
Mode Like set_multi_mcbsp_in.
Comments • See set_multi_mcbsp_in.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change DLL 617, OUT 617: compatibility with “Fly Extension” Commands.
References set_multi_mcbsp_in, read_multi_mcbsp, set_wobbel_control, set_wobbel_vector