Scanlab RTC6 PCIe Board - Mark_Date_Abs

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
530
innovators for industry
Normal List
Command
mark_date_abs
Function Marks a part of the date previously stored by time_fix, time_fix_f or time_fix_f_off in the
selected format at the current position. In the called indexed text strings or characters (see
below), any absolute Vector Commands and “Arc” Commands receive an offset (based on
the current coordinates at the time of the call).
Call mark_date_abs( Part, Mode )
Parameters Part See mark_date.
Mode See mark_date.
Comments • mark_date_abs has the same effect as mark_date. However, internal calling of the
indexed text strings (or characters) is by list_call_abs instead of list_call.
• If the command lists of the called indexed text strings (or characters) contain no
absolute commands, then there is no difference between mark_date_abs and
mark_date.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References mark_date