Scanlab RTC6 PCIe Board - Set_Sky_Writing_List

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
736
innovators for industry
Normal List
Command
set_sky_writing_list
Function Like set_sky_writing, but a list command.
Call set_sky_writing_list( Timelag, LaserOnShift )
Parameters Timelag Like set_sky_writing_para.
LaserOnShift Like set_sky_writing_para.
Comments • See set_sky_writing, set_sky_writing_para and set_sky_writing_para_list.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
In RTC5 Compatibility Mode, the RTC6 multiplies the value specified for LaserOnShift by
32. The allowed value range decreases accordingly.
Version info Available as of DLL 600, OUT 600, RBF 600.
References set_sky_writing, set_sky_writing_para, set_sky_writing_para_list.