Scanlab RTC6 PCIe Board - Page 557

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
557
innovators for industry
RTC4RTC6 New command.
For the parameter P , see para_jump_abs.
RTC5RTC6 Unchanged functionality.
For the parameter P , see para_jump_abs.
Version info Available as of DLL 600, OUT 600, RBF 600.
References laser_on_pulses_list, laser_on_list
Variable
List Command
para_laser_on_pulses_list