Scanlab RTC6 PCIe Board - Page 559

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
559
innovators for industry
RTC4RTC6 New command.
In RTC4 Compatibility Mode, the RTC6 multiplies the specified values for X and Y by 16.
The allowed value range decreases accordingly. For the parameter P , see para_jump_abs.
RTC5RTC6 Unchanged functionality.
For the parameter P , see para_jump_abs.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change OUT 619: handling of mark vector lengths = 0.
References mark_abs, set_vector_control, para_mark_abs_3d, para_mark_rel
Normal List
Command
para_mark_abs