RESULT INTERPRETATION/REPORTS, Stored Data, List Display (P1)
4-12 Sysmex SF-3000 Operator's Manual -- Revised September 1995
11) MARK
Indicates that the sample data is outside Mark Limits.
+ (backlit in yellow) : Over upper limit
– (backlit in yellow) : Below lower limit
12) STOP
Indicates that the sample data is outside the Sampler Stop Limits.
+ (backlit in red) : Over upper limit
– (backlit in red) : Below lower limit
13) Number of Stored Data
Indicates memory function and the amount of data stored in the memory.
Example)
2 5 0 / 5 0 0 ( 8 0 0 )
Number of data results currently stored in memory
Number of data results currently selected to be displayed
Number of marked data results
To Next Page
Loading...
