SYSMEX SF-3000 - Page 473

SYSTEM SETUP, Auto Management Programs
11-4 Sysmex SF-3000 Operator's Manual -- Revised March 1996
To execute auto management programs:
(1) Press the [Settings] key in the root menu. The settings second menu will be
displayed.
NOTE: If the [Settings] keypad is not displayed on the LCD, press [More]
key to change the displayed root menu.
DP:1234567890123
Auto
Mgmt.
Data
Criteria
Config.
Print
Set Value
General
Set Up
Flag
System
Return
Sysmex
XM HC GP DP SU
Ready Manual Mode Next No.1234567890123
Sampler
• Setting •
Figure 11-1: Settings Second Menu Screen
(2) Press [Auto Mgmt.] key in the second menu. The Auto Management submenu
appears as shown in Figure 11-2.
Output
Cond.
Output
Mode
Auto
Erase
Auto
Valid.
Return
DP:1234567890123
Sysmex
XM HC GP DP SU
Ready
Manual Mode Next No.1234567890123
Sampler
• Settings •
Figure 11-2: Auto Management Submenu Screen