INSTALLATION, Manual CP Unit
Sysmex SF-3000 Operator's Manual -- Revised August 1998 B-21
(10) Connect the whole blood aspiration tube in place (see Figure B-29).
Figure B-29: Connect Whole Blood Aspiration Tube
(11) Connect the Rubber Cap No.33 to the front panel.
NOTE: For use of SARSTEDT collection tube, please order and prepare Piercer
SE-M SA (PM) (P/N 921-0776-2).
(12) Close the MCP cover.
(13) After installation completes, verify that blood aspiration is performed without any
problem.
Figure B-30: Close MCP Cover
To Next Page
Loading...
